Cost Guides
Dishwasher Repair Cost in Los Angeles: 2026 Price Guide
July 17, 2026
Dishwasher repair costs in Los Angeles range from $85 for a diagnostic-only visit to $600+ for a control board replacement on a premium European unit. The right number for your situation depends on what’s actually failed, the brand, and the age of the machine.
Here’s what we actually charge for the most common dishwasher repairs across the LA area, along with a framework for deciding whether repair or replacement makes more sense.
Dishwasher Repair Cost by Repair Type
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Diagnostic visit | $85 | Applied toward repair if approved |
| Filter cleaning/service | Included in diagnostic | Fixes most “not cleaning” complaints |
| Spray arm replacement | $80–$150 | Quick, inexpensive fix |
| Door gasket/seal | $120–$220 | Most common leak repair |
| Door latch assembly | $150–$230 | Prevents dishwasher from starting |
| Water inlet valve | $130–$220 | Common with hard water sediment |
| Drain pump replacement | $150–$280 | Higher on premium brands |
| Circulation pump (Bosch) | $250–$400 | Integrated wash/drain unit |
| Control board | $200–$600+ | Widest range — brand-dependent |
These are real-world ranges from our service history across Los Angeles. Your exact cost depends on brand, model, and part availability.
How Brand Affects Repair Cost
Standard domestic brands (GE, Whirlpool, Maytag, Samsung, LG): Part costs are lower and availability is good. Most repairs land at the lower end of the ranges above.
Bosch: A different platform from standard American dishwashers — no visible heating element, since Bosch uses a condensation drying system that relies on the residual heat in the stainless tub. The pump and motor are a single integrated unit handling both wash and drain functions, which means fewer total parts but a more involved (and higher-cost) replacement if that unit fails. Bosch parts are generally well-priced and available quickly.
Miele: Runs proprietary control architecture, and error codes are model-range specific. The circulation pump, automatic dosing system, and softener unit all communicate through the main board in ways that require knowing the platform — this isn’t a “swap the generic part” repair. Miele parts are genuine-only; aftermarket substitutes frequently cause new error codes rather than fixing the original one. Parts occasionally take a few extra days to source but are worth the wait.
Thermador and Fisher & Paykel: Mid-to-high-end brands with moderately higher part costs than standard domestic units, but well within reasonable repair territory given their replacement cost.
Factors That Affect Your Specific Quote
Age of the unit. A 3-year-old dishwasher with a clogged filter or failed door latch: repair without hesitation. A 12-year-old unit with a failed control board: worth assessing against replacement cost, especially on standard brands where parts availability thins out over time.
Hard water buildup. Los Angeles has moderately hard water, and mineral sediment in the water inlet valve is a recurring issue across all brands. If your dishwasher has had more than one inlet valve replaced, a water softener or filter may be worth considering to prevent repeat failures.
Bosch and Miele parts sourcing. These platforms are genuinely worth repairing given their durability, but plan for potentially a few extra days if a specific part needs to be ordered rather than pulled from local stock.
The Repair-vs-Replace Decision Guide
The 50% Rule
If the repair cost exceeds 50% of what the dishwasher would cost to replace with a comparable unit, replacement is usually the smarter financial move.
For a standard $500 dishwasher, a repair over $250 needs real justification. For a Bosch 800 Series or Miele G 7000 running $1,200–$2,000+, almost any single repair passes this test — even a $400–$600 control board replacement.
Why the Math Differs for Bosch and Miele
Standard mid-range dishwashers (GE, Whirlpool, Samsung) generally aren’t built to run 15+ years, and parts availability thins out as models age. A repair exceeding half the replacement value on a 10-year-old standard unit is a borderline call.
Bosch and Miele are engineered differently — designed to run 20 years with proper service, with a robust parts supply to match. We’ve replaced drum seals and pumps on 12-year-old Miele dishwashers that went on to run perfectly for another 8 years. The repair math on these brands skews heavily toward “fix it” territory even at higher repair costs, simply because the machines are built to justify that investment.
Signs a Dishwasher Isn’t Worth Repairing
- Multiple unrelated failures in the same 12–18 month window
- A control board failure on a 12+ year old standard-brand unit where the board is only available refurbished
- Rust or corrosion visible in the tub or door frame, suggesting structural issues beyond the specific failure
What Our Diagnostic Visit Tells You
The $85 diagnostic covers a full inspection — filter, spray arms, drain path, door seal, control board function, and inlet valve — before we quote anything. If a repair makes sense, that $85 applies toward the total cost. If it doesn’t, you’ve paid for clear, honest information rather than a guess.
We serve all of Los Angeles, including dedicated dishwasher repair in Los Angeles, Beverly Hills, and Santa Monica. Call (323) 806-3039 for same-day service.
For troubleshooting help before you call, see our guide on dishwashers not cleaning or draining, or visit our Dishwasher Repair service page for the full breakdown by problem type.