Dryer Repair · Los Angeles, CA
Dryer Repair in Los Angeles, CA
Same-day dryer repair across Los Angeles — gas dryers in older Eastside bungalows, electric units in newer Westside construction, and stacked units everywhere in between.
Same-Day Service
All Major Brands
Upfront Pricing
30-Day Labor / 90-Day Parts
4.9 Google Rating
$85 Diagnostic
Common Dryer Repair Problems We Fix in Los Angeles
- Dryer not heating — clothes come out cold and wet
- Dryer runs but takes multiple cycles to dry
- Dryer makes squeaking or thumping noise
- Dryer won't start
- Dryer shuts off mid-cycle
- Dryer drum not turning
- Dryer producing burning smell
- Gas dryer igniter not firing
- Lint trap clogged or exhaust blocked
- Restricted, corroded, or overly long vent runs
Dryer Repair Cost in Los Angeles
Repair cost depends on the appliance brand, failed part, and access. Most customers start with our $85 diagnostic/service fee, which is applied toward the approved repair. We provide a written estimate after diagnosis and before any work begins.
| Issue | Labor Starting Price |
|---|---|
| Diagnostic visit | $85 (applied to repair) |
| Thermal fuse replacement | labor from $120 |
| Heating element (electric) | labor from $180 |
| Gas igniter replacement | labor from $200 |
| Valve coil set (gas) | labor from $180 |
| Drum belt replacement | labor from $160 |
| Motor replacement | labor from $280 |
Labor starting prices only. Parts, tax, and additional components are quoted separately. Written estimate always provided before repair begins.
Dryer repair in Los Angeles covers more ground than most cities — gas dryers original to 1920s–1950s Eastside bungalows in Highland Park and Eagle Rock, electric units in Westside condos that never got a gas line run to the laundry closet, and stacked combos in rental apartments across Hollywood and Koreatown that see heavy daily use.
Gas Dryers in Older LA Homes
A significant share of our dryer calls come from the Eastside — Highland Park, Eagle Rock, Glassell Park, Mount Washington — where original gas dryer installations and their vent runs are decades old. The most common failure is a weak or cracked igniter: it glows, but not hot enough to reliably open the gas valve, so the dryer tumbles cold. We also see thermal fuses blow more often in these homes because the original vent runs are frequently too long or have too many bends for a modern high-capacity dryer, restricting airflow and causing the dryer to overheat.
If your dryer is taking two or more cycles to dry, or the exterior feels unusually hot mid-cycle, that’s a vent restriction — not a component failure — and we check the full vent path as part of every diagnostic.
Gas vs. Electric: How We Diagnose Each
A gas dryer produces heat through a burner assembly — the igniter glows to light the gas, and a radiant sensor confirms the flame before holding the valve open. When it fails, the dryer starts and tumbles but never lights, or lights inconsistently. We test resistance across the igniter with a multimeter before replacing anything; a healthy glow-bar igniter reads within spec, and outside that range it won’t draw enough current to open the valve.
Electric dryers, more common in Westside condos built without gas lines to the laundry closet, fail through the heating element instead — a coiled resistance wire that eventually breaks like any filament. We test for continuity across the element, and always check the thermal fuse and thermostats at the same time, since a burned-out element was usually caused by one of those failing to cut power first.
Stacked Units in Apartments
Hollywood, Koreatown, and Mid-City apartment buildings run a huge number of stacked washer/dryer combos in tight closet installs. These units get used constantly and maintained rarely between tenants. Getting to the drum bearing or heating element in a stacked configuration takes more time than a standalone dryer, and we quote that access time upfront rather than surprising you after the job starts.
Dryer Repair Cost in Los Angeles
All prices below are approximate labor starting points only. Parts, tax, and additional components are quoted separately after diagnosis.
- Diagnostic visit: $85 (applied to repair when approved)
- Thermal fuse replacement: labor from $120 (includes vent inspection)
- Heating element (electric): labor from $180
- Gas igniter replacement: labor from $200
- Valve coil set (gas): labor from $180
For the full breakdown of gas vs. electric dryer repairs and fire-hazard vent warnings, see our Dryer Repair page. If the washer needs attention too, we handle both in one visit — see Washer Repair in Los Angeles. Call (323) 806-3039 for same-day service.
Dryer Repair FAQ — Los Angeles
Why is my dryer not heating?
The most common causes are a blown thermal fuse, a faulty heating element (electric), a failed gas igniter or valve (gas), or a clogged exhaust vent. Our technicians diagnose the exact cause and fix it on the spot.
Do you repair gas dryers in older LA homes?
Yes. Los Angeles has a large stock of older gas dryers, particularly in Eastside neighborhoods like Highland Park, Eagle Rock, and Glassell Park. Igniter failure is the single most common repair we perform on these units.
My dryer is in a stacked closet unit — can you still service it?
Yes. Stacked units are extremely common in Los Angeles apartments and condos. Getting to the back panel, heating element, or drum bearing sometimes means partially unstacking the units — we factor this into the quote upfront so there are no surprises.
Is it safe to use a dryer that smells like burning?
No — stop using it immediately. A burning smell can indicate lint buildup near the heating element, a faulty motor, or worn drum seals, all of which are fire hazards. Call us for same-day service.
What dryer brands do you service?
We service all major brands: Whirlpool, LG, Samsung, GE, Maytag, Speed Queen, Electrolux, Kenmore, Bosch, Miele, and more.
Need Appliance Repair? We're Ready to Help!
Same-day service available. Diagnostic fee waived when you approve the repair.