Range Repair in Los Angeles, CA

Range repair is one of our most frequent calls across Los Angeles, and it makes sense — LA households cook on gas at a far higher rate than the national average, and the range mix here skews notably higher-end than most cities, especially in remodeled kitchens across the Eastside hills and Westside.

Gas Ranges Dominate the City

The overwhelming majority of range calls we get citywide involve gas burners that won’t light reliably or click continuously without igniting. A cracked or dirty igniter electrode, a misaligned burner cap, or food debris clogging the burner ports account for most of these. Continuous clicking with no flame is almost always moisture in the igniter switch — boilover liquid gets into the module and causes it to cycle nonstop. Drying it out resolves it sometimes; a corroded switch needs replacement in others.

Sealed vs. Open Burners

Most standard ranges use sealed burners, flush with the cooktop surface so debris can’t fall below. Pro-style ranges — particularly Viking — often use open burners, where the flame is exposed and a drip pan sits underneath. Open burners deliver better heat control but use different igniter configurations, and diagnosing a no-light complaint on an open-burner range means checking a different set of components than on a sealed consumer range.

Professional-Grade Ranges in Remodeled Kitchens

Los Angeles carries a heavy concentration of professional-style ranges — 36-inch Wolf and Viking dual-fuel units putting out 15,000–20,000 BTU per burner, some hitting 25,000 BTU on power burners. These aren’t scaled-up consumer ranges; the igniter systems are higher-energy, the gas valves are heavier-duty, and Viking in particular has changed manufacturers and ownership multiple times, meaning parts from different model years aren’t interchangeable. We track these differences to get the right part ordered on the first call. See our Range Repair page for the full brand-by-brand breakdown.

Range Repair Cost in Los Angeles

Our $85 diagnostic fee is applied toward your approved repair.

All prices below are approximate labor starting points only. Parts, tax, and additional components are quoted separately after diagnosis.

• Burner igniter replacement (gas): labor from $120 per burner
• Oven igniter replacement: labor from $180
• Spark module replacement: labor from $150
• Control board: labor from $250

Pro-style and luxury brand repairs (Wolf, Viking, Thermador) require OEM parts that can cost 2–4× more than standard brand equivalents. All repairs carry our 30-day labor / 90-day parts warranty. Call (323) 806-3039 for same-day or next-day service anywhere in Los Angeles.